Prosoft-technology 5201-MNET-101S Bedienungsanleitung PDF herunterladen (Seite 92)

Reference IEC-101 Slave ♦ ProLinx Communication Gateway

Protocol Manual IEC 60870-5-101 v3 Slave (Firmware version 3.xx)

Page 92 of 159 ProSoft Technology, Inc.

August 6, 2010

Refer to the following parameter to configure the select/operate timeout period.

After the gateway receives the SELECT operation it will wait for this period of

time for the EXECUTE operation. If the gateway does not receive an EXECUTE

operation within this period of time it will require another SELECT operation

before the EXECUTE operation.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 158 159

IEC-101 Slave 1
Your Feedback Please 2
ProSoft Technology 2
Product Documentation 2
Markings 3
Contents 5
1 Start Here 11
1.3.1 Using the Online Help 12
1.4.2 Renaming PCB Objects 15
To Download the Project File 21
2.1 [IEC-870-5-101 Port 0] 24
2.1.1 Enabled 24
2.1.2 Time DB Offset 24
ES or NO 25
to 65535 25
2.1.15 Maximum ASDU Resp Len 27
2.1.17 Freeze Start Type 27
2.1.18 Interval for Freeze 29
2.1.19 Set Priority Queues 30
2.1.20 Event Priority 31
2.1.22 IV Check Delay Time 33
2.1.23 IV Fail Count 33
2.1.24 Event Scan Delay 33
2.1.25 Scan Events 34
2.1.26 Time Type 35
2.1.27 Use Balanced Mode 35
2.1.28 Retry Count 35
milliseconds 36
2.1.35 Receive Timeout 37
2.1.36 Hardware Handshaking 37
2.2.1 Short Pulse Time 38
2.2.2 Long Pulse Time 38
2.2.3 Point Count 39
2.2.4 Sequence Flag 40
2.2.5 Parameter Offset 41
2.3 [M_SP_NA_1] 42
2.4 [M_DP_NA_1] 42
2.5 [M_ST_NA_1] 43
2.6 [M_BO_NA_1 104] 43
2.7 [M_ME_NA_1] 44
2.8 [M_ME_NB_1] 44
2.9 [M_ME_NC_1] 45
2.10 [M_IT_NA_1] 45
2.11 [C_SC_NA_1] 46
2.12 [C_DC_NA_1] 46
2.13 [C_RC_NA_1] 47
2.14 [C_BO_NA_1 104] 47
2.15 [C_SE_NA_1] 48
2.16 [C_SE_NB_1] 48
2.17 [C_SE_NC_1] 49
2.18 Group Codes 50
3.3.4 RS-422 55
3.3.6 RS-485 and RS-422 Tip 55
4.1 LED Indicators 57
4.1.1 Base Gateway LEDs 57
to open the Main menu 60
4.2.2 Navigation 61
4.2.3 Keystrokes 61
5 Reference 63
5.1.3 Internal Database 64
5.2.4 Using Monitor Points 81
100 Bit 0 of word 100 94
101 Bit 1 of word 100 94
102 Bit 2 of word 100 94
400 Words 5 and 6 98
401 Words 6 and 7 98
402 Words 9 and 10 98
5.2.6 Events 99
Example - Event Priority 109
Statement 129
6.1 System or Device 130
6.2 Network Configuration 130
6.3 Physical Layer 130
6.6.6 File Transfer 134
6.8.3 Read Procedure 137
6.8.6 Station Interrogation 138
6.8.7 Clock Synchronization 138
6.8.8 Command Transmission 139
6.8.10 Parameter Loading 140
6.8.11 Parameter Activation 140
6.8.12 Test Procedure 140
6.8.13 File Transfer 140
6.8.14 Background Scan 141
In This Chapter 143
Address 146
Require Select 146
7.4 C_RC_NA Form 147
8.2.1 All Product Returns: 150
8.3 LIMITED WARRANTY 152
8.3.8 No Other Warranties 155
8.3.9 Allocation of Risks 155

Kommentare zu diesen Handbüchern

Keine Kommentare

Prosoft-technology 5201-MNET-101S Bedienungsanleitung Seite 92

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Relais Prosoft-technology 5201-MNET-101S