Prosoft-technology MVI56E-SIE Bedienungsanleitung PDF herunterladen (Seite 36)

Start Here MVI56E-SIE ♦ ControlLogix Platform

User Manual Client Communication Module

Page 36 of 168 ProSoft Technology, Inc.

September 6, 2012

1.9 Downloading the Sample Program to the Processor

Note: The key switch on the front of the ControlLogix processor must be in the

REM or PROG position.

1 If the processor is not already online, open the Communications menu, and

then choose DOWNLOAD. RSLogix 5000 will establish communication with the

processor. Download does not have to occur using the processor's serial

port, as shown here. Download may be achieved through any available

network connection.

2 When communication is established, RSLogix 5000 will open a confirmation

dialog box. Click the DOWNLOAD button to transfer the sample program to the

processor.

3 RSLogix 5000 will compile the program and transfer it to the processor. This

process may take a few minutes.

4 When the download is complete, RSLogix 5000 will open another

confirmation dialog box. If the key switch is in the REM position, click OK to

switch the processor from PROGRAM mode to RUN mode.

Note: If an error message is recieved during these steps, refer to the RSLogix

documentation to interpret and correct the error.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 167 168

Keine Kommentare

Prosoft-technology MVI56E-SIE Bedienungsanleitung Seite 36