Prosoft-technology MVI69E-MBTCP Bedienungsanleitung PDF herunterladen (Seite 55)

MVI69E-MBTCP ♦ CompactLogix Platform Configuring the MVI69E-MBTCP Using PCB

Modbus TCP/IP Enhanced Communication Module User Manual

ProSoft Technology, Inc. Page 55 of 150

May 20, 2015

3.2.6 Static ARP Table

This section defines a list of static IP addresses that the module uses when an

ARP (Address Resolution Protocol) is required. The module accepts up to 40

static IP/MAC Address data sets.

Use the Static ARP table to reduce the amount of network traffic by specifying IP

addresses and their associated MAC (hardware) addresses that the MVI69E-

MBTCP module communicates with regularly.

In ProSoft Configuration Builder tree view, double-click the STATIC ARP TABLE

icon.

Parameter

Value

Description

IP Address

xxx.xxx.xxx.xxx

This table contains a list of static IP addresses that the module

uses when an ARP is required. The module accepts up to 40

static IP/MAC address data sets.

Important: If the device in the field is changed, this table must be

updated to contain the new MAC address for the device and

downloaded to the module. If the MAC is not changed, there is no

communication with the module.

Hardware MAC

Address

FF.FF.FF.FF.FF.FF

This table contains a list of static MAC addresses that the module

uses when an ARP is required. The module accepts up to 40

static IP/MAC address data sets.

Important: If the device in the field is changed, this table must be

updated to contain the new MAC address for the device and

downloaded to the module. If the MAC is not changed, there is no

communication with the module.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 149 150

Keine Kommentare

Prosoft-technology MVI69E-MBTCP Bedienungsanleitung Seite 55