Prosoft-technology AN-X-PB Bedienungsanleitung PDF herunterladen (Seite 46)

Page

AN-X-PBCAPT November 2011

Click OK to select the AN-X.

The title bar of AnxInit shows the MAC Address and IP Address of the

currently selected AN-X.

Set AN-X IP Configuration

Utilities/AN-X IP Configuration sets the AN-X IP address and hostname.

The AN-X must be on the local Ethernet to set its IP address.

First select the AN-X using the Utilities/Select An AN-X command.

Next select Utilities/AN-X IP Configuration. The AN-X TCP/IP

Configuration dialog appears.

Enter a Host Name for the AN-X. This name is used internally by AN-X

and may be used to identify the AN-X if you have a DNS server on your

network. The name can be from 1 to 31 characters long.

To configure the AN-X to obtain its IP address from a DHCP server on

the network, select Obtain an IP address automatically (DHCP)

To configure the AN-X to use a static IP address, select Use the

following Settings and enter the following:

• the desired IP address for the AN-X.

• the Subnet mask for the AN-X

• the default gateway for your network.

You must enter a valid default gateway address even if there is no device

at the gateway address on the network.

Click OK to complete the configuration.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 60 61

Keine Kommentare

Prosoft-technology AN-X-PB Bedienungsanleitung Seite 46