Prosoft-technology MVI56-PDPMV1 Bedienungsanleitung PDF herunterladen (Seite 129)

MVI56-PDPMV1 ♦ ControlLogix Platform Configuring the MVI56-PDPMV1 Module

PROFIBUS DPV1 Master User Manual

ProSoft Technology, Inc. Page 129 of 255

March 22, 2011

2.5.4 Viewing the Controller Tags in RSLogix 5000

Note: For this procedure, you must connect a serial cable from the serial port on your PC to the

DB9M connector on the ControlLogix processor.

1 Open the sample ladder logic in RSLogix 5000.

2 Open the C

OMMUNICATIONS

menu, and choose G

NLINE

3 In the Controller Organization window, double-click C

ONTROLLER

AGS

4 Expand the MVI56PDPMV1, MVI56PDPMV1.Status and

MVI56PDPMV1.Status.Fieldbus tags.

Note: For the FLEX sample program, you must toggle the command bit

MVI56PDPMV1.Command.GetStatus in order to update the status data. For the LEGACY sample

program the status data is updated automatically.

In the illustration above, the binary value in

MVI56PDPMV1.Status.Fieldbus.FB_Slave_Cfg_List[15] indicates that a slave

is configured at address 125 (the PROFIBUS Slave Address configured in the

Slave Configuration (page 86) procedure).

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 254 255

Keine Kommentare

Prosoft-technology MVI56-PDPMV1 Bedienungsanleitung Seite 129