Prosoft-technology MVI56E-LDM Bedienungsanleitung PDF herunterladen (Seite 217)

ControlLogix Platform ♦ "C" Programmable Cable Connections

Linux Application Development Module Developer's Manual

ProSoft Technology, Inc. Page 211 of 264

March 12, 2014

6.2.2 RS-232: Null Modem Connection (Hardware Handshaking)

This type of connection is used when the device connected to the module

requires hardware handshaking (control and monitoring of modem signal lines).

6.2.3 RS-232: Null Modem Connection (No Hardware Handshaking)

This type of connection can be used to connect the module to a computer or field

device communication port.

Note: For most null modem connections where hardware handshaking is not required, the Use

CTS Line parameter should be set to N and no jumper will be required between Pins 7 (RTS) and 8

(CTS) on the connector. If the port is configured with the Use CTS Line set to Y, then a jumper is

required between the RTS and the CTS lines on the port connection.

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 263 264

Keine Kommentare

Prosoft-technology MVI56E-LDM Bedienungsanleitung Seite 217