Prosoft-technology MVI71-DFNT Bedienungsanleitung PDF herunterladen (Seite 157)

MVI71-DFNT ♦ PLC 5 Reference

EtherNet/IP Client/Server Communication Module User Manual

ProSoft Technology, Inc. Page 157 of 175

February 3, 2011

After selecting the option, the following dialog box is displayed:

Select the N

ETWORK TYPE and PRIMARY COMMUNICATION DRIVER for the channel

to be associated with the DFNT module. The N

ETWORK TYPE should be TCP/IP

and the P

RIMARY COMMUNICATION DRIVER name should match that set up in

RSLinx. Click OK to save the information.

Next select the N

ODE option from the EDIT MODE tab. After selecting the option,

the following dialog box is displayed:

Enter a record in the dialog box for the DFNT module to be addressed. The

AME field identifies the module to the RSView system. The CHANNEL parameter

should be that defined in the channel set up defined above. The S

TATION

parameter should be set to the IP address of the DFNT module. Select the

LOSE button after completing the node entry. If your version of the RSView

supports ControlLogix controller tag read and write operations, select the device

type consistent with the ControlLogix processor. This will permit direct access to

the controller tags simulated in the module. Use of controller tags simplifies

handling of the data in RSView as the data will be passing in the correct data

format (that is, bit, word, float).

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 174 175

Keine Kommentare

Prosoft-technology MVI71-DFNT Bedienungsanleitung Seite 157