Prosoft-technology MVI56-DFCMR Bedienungsanleitung PDF herunterladen (Seite 53)

Diagnostics and Troubleshooting MVI56-DFCMR ♦ ControlLogix Platform

DF1 Interface Module with Reduced Data Block

ProSoft Technology, Inc. Page 53 of 113

October 20, 2008

Character Definition

<R-> These characters are inserted when the RTS line is dropped low on the port.

<CS> These characters are displayed when the CTS line is recognized high.

_TT_

These characters are displayed when the timing mark interval has been reached.

This parameter is user defined.

Stopping the Data Analyzer

Press [S] to stop the data analyzer. Use this option to freeze the display so the

data can be analyzed. To restart the analyzer, press [B].

Important: When in analyzer mode, program execution will slow down. Only use this tool during a

troubleshooting session. Before disconnecting from the Config/Debug port, please press [S] to stop

the data analyzer, and then press [M] to return to the main menu. This action will allow the module

to resume its normal high speed operating mode.

Returning to the Main Menu

Press [M] to return to the Main Menu.

4.1.7 Data Analyzer Tips

From the main menu, press [A] for the "Data Analyzer". You should see the

following text appear on the screen:

After the "Data Analyzer" mode has been selected, press [?] to view the Data

Analyzer menu. You will see the following menu:

From this menu, you can select the "Port", the "format", and the "ticks" that you

can display the data in.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 112 113

Keine Kommentare

Prosoft-technology MVI56-DFCMR Bedienungsanleitung Seite 53