Prosoft-technology MVI56-DFCMR Bedienungsanleitung Seite 93
- Seite / 113
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Reference MVI56-DFCMR ♦ ControlLogix Platform
DF1 Interface Module with Reduced Data Block
ProSoft Technology, Inc. Page 93 of 113
October 20, 2008
Column Parameter Description Parameter
9 Element Number The parameter defines the element in the file where
write operation will start. If a value of -1 is entered for
the parameter, the field will not be used in the
command, and the default element will be used.
P2
10 Sub-Element Number This parameter defines the sub-element to be used with
the command. Refer to the AB documentation for a list
of valid sub- element codes. If the value is set to -1, the
default sub-element number will be used.
P3
11 Not Used This field is not used by the command. Values entered
in this column will be ignored.
P4
This function writes one or more words of data to a PLC data table. This function
should work on the following devices: PLC-5.
Function Code #101 - Word Range Read (PLC-5 Command) (Binary Address)
Column Parameter Description Parameter
1 Enable/Type Word 0=Disabled and 1=Continuous.
2 Virtual Database Address This parameter defines the database address of the first
data point to be associated with the command.
3 Poll Interval Minimum time in tenths of a second to wait before
polling with this command.
4 Count Number of data word values to be considered by the
function.
5 Swap Type Code Swap type code for command: 0=None, 1=Swap words,
2=Swap words & bytes and 3=swap bytes in each word.
6 Node Address Address of unit to reach on the data highway.
7 Function Code = 101 Word Range Write Command.
8 File Number PLC-5 file number to be associated with the command.
If a value of -1 is entered for the parameter, the field will
not be used in the command, and the default file will be
used.
P1
9 Element Number The parameter defines the element in the file where
write operation will start. If a value of -1 is entered for
the parameter, the field will not be used in the
command, and the default element will be used.
P2
10 Sub-Element Number This parameter defines the sub-element to be used with
the command. Refer to the AB documentation for a list
of valid sub- element codes. If the value is set to -1, the
default sub-element number will be used.
P3
11 Not Used This field is not used by the command. Values entered
in this column will be ignored.
P4
This function reads one or more words of data from a PLC data table. This
function should work on the following devices: PLC-5.
Function Code #102 - Read-Modify-Write (PLC-5 Command) (Binary Address)
Column Parameter Description Parameter
1 Enable/Type Word 0=Disabled, 1=Continuous and 2=Conditional.
2 Virtual Database Address This parameter defines the database address for the
data to be associated with the command.
- MVI56-DFCMR 1
- Please Read This Notice 2
- Battery Life Advisory 3
- Your Feedback Please 3
- Contents 5
- 1 Start Here 9
- 1.2 Package Contents 10
- 1.3 Setting Jumpers 11
- 1.6.3 Configuring RSLinx 16
- 2.2 Configuration Data 27
- 2.2.1 Backplane Setup 27
- 2.2.2 Port 1 Setup 27
- 2.2.3 Port 2 Setup 30
- 2.2.4 Port 1 Commands 32
- 2.2.5 Port 2 Commands 33
- 2.2.6 Miscellaneous Status 33
- 2.2.7 Command Control 34
- 3 Ladder Logic 37
- 3.1.4 File Map Override 40
- 3.4 User Data Objects 43
- 4.1.2 Required Hardware 45
- 4.1.3 Required Software 46
- 4.1.5 Main Menu 47
- Code Description 50
- 0 Transfer successful 50
- 4.1.6 Data Analyzer 51
- 4.1.7 Data Analyzer Tips 53
- 4.1.8 Database View Menu 56
- 4.2 LED Status Indicators 60
- 4.2.2 Troubleshooting 62
- 5 Reference 63
- 5.2 Functional Overview 65
- 5.2.1 General Concepts 65
- Processor 74
- 5.2.3 Master Driver 77
- 5.3 Cable Connections 79
- 5.3.2 RS-232 81
- 5.3.3 RS-422 83
- 5.3.4 RS-485 84
- 5.6 Error Codes 87
- 5.6.1 Local STS Error Codes 87
- 5.7.1 Introduction 89
- 5.7.2 Command Function Codes 90
- 5.8 DF1 Command List Form 101
- In This Chapter 103
- 6.2.1 All Product Returns: 104
- 6.3 LIMITED WARRANTY 106
- 6.3.8 No Other Warranties 109
- 6.3.9 Allocation of Risks 109
Verwandte Produkte und Handbücher für Relais Prosoft-technology MVI56-DFCMR
(193 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.105 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern