Prosoft-technology MVI69-DNP Bedienungsanleitung Seite 29
- Seite / 129
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Configuring the MVI69-DNP Module MVI69-DNP ♦ CompactLogix or MicroLogix Platform
DNP 3.0 Master/Slave Communication Module
ProSoft Technology, Inc. Page 29 of 129
November 3, 2008
2.3 Slave List
The slave list defines the IED units and their specific communication parameters
for a DNP master port. Up to 40 IED units can be defined in the module to be
associated with the master port. The structure of each row in the list is defined in
the following table.
Column Variable Name Data Range Description If Error
1 DNP Slave Address 0 to 65534 This is the slave address for the unit to
override the default values.
Ignore
2 Data Link Confirm Mode Coded Value
(0 = Never, 1 =
Sometimes,
2 = Always)
This value specifies if data link frames sent
to the remote device require a data link
confirm. This value should always be set to
zero for almost all applications.
0
3 Data Link Confirm Tout 1 to 65535
milliseconds
This parameter specifies the time to wait for
a data link confirm from the remote device
before a retry is attempted.
300
4 Maximum Retries for Data
Link Confirm
0 to 255 retries Maximum number of retries at the Data Link
level to obtain a confirmation. If this value is
set to 0, retries are disabled at the data link
level of the protocol. This parameter is only
used if the frame is sent with confirmation
requested.
3
5 Application Layer Response
Timeout
1 to 65535
milliseconds
Timeout period the master will wait for each
response message fragment. If data link
confirms are enabled, make sure the
timeout period is set long enough to permit
all data confirm retries.
5000
6 Slave Mode Coded Value (Bit
0 = Enable, Bit 1
= Unsol Msg., Bit
2 = Use DM, Bit
3 = Auto Time
Sync)
This word contains bits that define the slave
mode. The slave mode defines the
functionality of the slave device and can be
combined in any combination. The fields
have the following definition: Enable:
determines if this slave will be used. Unsol
Msg.: causes an enabled unsolicited
message to be sent to the slave when its
RESTART IIN bit is set. This parameter is
also required for unsolicited message
reporting by the IED unit. Use DM: uses
delay measurement. Auto Time Sync: time
synchronization used when NEED TIME IIN
bit set.
2.4 Command List
The command list stores the command list used by the DNP master port. This list
only must be defined if the DNP master port is used. Up to 300 commands can
be defined for the master port. The structure of each row in the list is shown in
the following table.
Word Offset Definitions
0 Port/Flags
1 Slave Address
2 Object
3 Variation
4 Function
- MVI69-DNP 1
- Please Read This Notice 2
- Contents 5
- 1 Start Here 9
- 1.2 Package Contents 10
- 1.3 Setting Jumpers 11
- 1.6.1 Configuring RSLinx 17
- 2.1 Configuration File 21
- 2.3 Slave List 29
- 2.4 Command List 29
- 2.4.9 Poll Interval 34
- 3 Ladder Logic 41
- 3.1.2 DNPSlvStat Object 42
- 3.1.3 DNPBackplane Object 44
- 3.1.4 DNPData Object 44
- 3.2 Special Objects 45
- 3.2.1 DNPCROB Object 45
- 3.2.2 DNPEventMsg Object 45
- 3.2.3 DNPSlave_Err Object 46
- 3.2.4 DNP_BI_Event Object 46
- 3.2.5 DNP_AI_Event Object 46
- 60 62 61 51
- 120 122 121 51
- 240 242 241 51
- 4.1.2 Required Hardware 54
- 4.1.3 Required Software 55
- 4.1.5 Main Menu 56
- 4.2 LED Status Indicators 66
- 4.2.2 Troubleshooting 68
- 5 Reference 69
- 5.2 Functional Overview 72
- 5.2.1 General Concepts 72
- 5.2.2 Normal Data Transfer 75
- Processor 87
- 5.3 Cable Connections 89
- 5.3.2 RS-232 91
- 5.3.3 RS-422 93
- 5.3.4 RS-485 94
- 5.4 Error Status Table 95
- 5.4.1 Module Error Codes 99
- 5.5 Internal Indication Word 103
- 5.5.1 First Byte 103
- 5.5.2 Second Byte: 103
- In This Chapter 119
- 6.2.1 All Product Returns: 120
- 6.3 LIMITED WARRANTY 122
- 6.3.8 No Other Warranties 125
- 6.3.9 Allocation of Risks 125
Verwandte Produkte und Handbücher für Relais Prosoft-technology MVI69-DNP
(152 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.109 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern