Prosoft-technology MVI69-DNP Bedienungsanleitung PDF herunterladen (Seite 33)

Configuring the MVI69-DNP Module MVI69-DNP ♦ CompactLogix or MicroLogix Platform

DNP 3.0 Master/Slave Communication Module

ProSoft Technology, Inc. Page 33 of 129

November 3, 2008

2.4.1 Slave Address

This parameter specifies the IED unit address on the DNP network to consider

with the command. The parameter has a range of 0 to 65535. The value of

65535 is reserved for broadcast messages. Verify that the slave configuration

information is set up in the module for each slave defined in the command list.

2.4.2 Object

This parameter specifies the DNP object type in the command. Valid objects for

the module are 1, 2, 12, 20, 21, 30, 32, 41, 50, 60 and 80. A value of 0 is

permitted in this field for a set of special commands.

2.4.3 Variation

This parameter is specific to the object type selected.

2.4.4 Function

This parameter specifies the DNP function for the command list object. The

object type determines the value of the functions permitted. For example, the

only function permitted for binary input data points is the read function (Function

Code 1). For counter and output objects, more functions are available.

2.4.5 Address In Slave

This value must be greater-than or equal to zero. If it is set to a value less-than

zero, the command will be ignored. This parameter specifies the starting point

address to consider in the IED unit.

2.4.6 Point Count

This parameter defines the number of points in the IED unit. Refer to the

discussion above for the interpretation of this parameter's values for the different

object types.

2.4.7 DNP DB Address

This parameter defines the starting location in the DNP database to be used with

the command. If the parameter has a value of -1, the DNP database is not used

with the point.

2.4.8 IED DB Address

This parameter defines the starting location in the IED database to be used with

the command. If the parameter has a value of -1, the IED database is not used

with the point.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 128 129

Keine Kommentare

Prosoft-technology MVI69-DNP Bedienungsanleitung Seite 33