ProSoft Technology ProTalk PTQ-104C Bedienungsanleitung Seite 145
- Seite / 195
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
PTQ-104S Rev2 ♦ Quantum Platform Reference
IEC 60870-5-104 Server for Quantum User Manual
ProSoft Technology, Inc. Page 145 of 195
February 22, 2013
Refer to the following parameter to configure the select/operate timeout period.
After the module receives the SELECT operation it will wait for this period of time
for the EXECUTE operation. If the module does not receive an EXECUTE
operation within this period of time it will require another SELECT operation
before the EXECUTE operation.
Command Points Addressing
Command points must be configured in a database area that is updated in the
module. You must associate each point to a database address in the PTQ-104S
module. The interpretation of the DB address parameter in the configuration
tables depends on the point type configured and the type of addressing
associated with that point type.
Data Type
Data Size
Addressing Type
C_SC_NA
1 bit
Bit
C_DC_NA
2 bits
Bit
C_RC_NA
1 byte
Byte
C_BO_NA
2 words
Double-word
C_SE_NA
1 word
Word
C_SE_NB
1 word
Word
C_SE_NC
2 words
Double-word
- PTQ-104S Rev2 1
- Your Feedback Please 2
- Information for ProTalk 3
- Product Users 3
- Warnings 3
- Important Notice: 4
- Contents 5
- 1 Start Here 11
- 1.1.1 Package Contents 12
- 1.1.2 Quantum Hardware 12
- 1.1.3 PC and Software 13
- THERNET CONFIGURATION icon 18
- DIT dialog box 19
- 2.1 Create a New Project 22
- EW DEVICE 23
- to continue 23
- 2.3 Build the Project 25
- ROGRESS dialog box 29
- TART / PROGRAMS / CONCEPT 32
- MODCONNECT TOOL 32
- 3.2 Creating a New Project 33
- dialog box 36
- to save the settings 38
- ES to confirm the settings 38
- PECIALS 39
- PECIALS dialog box 39
- 3.5 Saving the Project 40
- ODULE as PTQ: 46
- 5 Module Configuration 49
- 5.1.2 Set Module Parameters 53
- ILE menu, and choose PRINT 54
- 5.2.1 Read Register Start 55
- 5.2.2 Read Register Count 55
- 5.2.3 Write Register Start 55
- 5.2.4 Write Register Count 55
- 5.2.5 3X Register Start 55
- 5.2.6 4X Register Start 56
- 5.2.7 Module Name 56
- 5.2.8 Error Offset 56
- 5.3 Backplane Data Exchange 56
- 5.3.3 Event Messages (9958) 65
- 5.4 [SNTP CLIENT] 69
- 5.4.1 NTP Server IP Address 70
- 5.4.2 Time Zone 70
- 5.4.4 Database Register 71
- 5.5 [I104S] Section 71
- 5.6.1 Use IP List 72
- 5.6.2 Override StartDT 72
- O (0) or YES (1) 73
- to 1000, default value = 30 73
- 5.6.10 Time DB Offset 74
- 5.6.11 Error Offset 74
- seconds 75
- 5.6.19 Use ACTTERM with step 76
- 5.6.20 Event Scan Delay 76
- 5.6.22 Set Priority Queues 76
- 5.6.23 Cyclic Set IV Time 77
- 5.6.24 IV Check Delay Time 78
- 5.6.25 IV Fail Count 79
- 5.6.26 Scan Events 79
- 5.6.27 Time Type 80
- 5.6.28 Use Recent 80
- 5.7.1 Short Pulse Time 82
- 5.7.2 Long Pulse Time 82
- 5.7.5 Point Count 83
- 5.7.6 Sequence Flag 84
- 5.7.7 Parameter Offset 85
- ADDRESS value 87
- 5.24 Group Codes 92
- To Download the Project File 96
- OWNLOAD FROM PC TO 97
- OWNLOAD dialog box 97
- OWNLOAD button 97
- OWNLOAD dialog 100
- 7 Hot Standby Support 101
- 7.1 Hot Standby Overview 102
- 7.1.3 System Components 103
- Standby with Unity Systems 104
- Example #1 105
- 7.2.1 Overview 106
- In This Chapter 111
- 8.1.1 Required Hardware 112
- IAGNOSTICS 113
- IAGNOSTICS dialog box 113
- to open the Main Menu 114
- 8.1.3 Navigation 115
- 8.1.4 Main Menu 116
- to return to the Main Menu 120
- 8.2 LED Indicators 121
- 8.2.2 Error Status Table 122
- 9 Reference 123
- 9.1 Product Specifications 124
- 9.1.1 Standards 124
- 9.2.1 Module Address 127
- 9.2.3 Using Monitor Points 132
- Example - Mode A 138
- Example (C_SC_NA) 144
- 9.2.5 Data Communication 150
- Example: 151
- 9.2.6 Events 156
- Example - Event Priority 167
- 9.2.7 Sequence Flag 169
- 9.3 Cable Connections 170
- 9.3.1 Ethernet Connection 170
- 9.4 Error Status Table 171
- 9.5 Group Codes 174
- 9.6.1 System or device 175
- 9.6.2 Application Layer 175
- Point Number 186
- Database Address 186
- Group Assignment 186
- Default Deadband 187
- 9.7.4 C_RC_NA_1 Form 189
- 10.2 Warranty Information 192
Verwandte Produkte und Handbücher für Server ProSoft Technology ProTalk PTQ-104C
(306 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.045 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern