Prosoft-technology 5201-DFNT-104S Bedienungsanleitung Seite 133
- Seite / 157
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Reference 104S v2 ♦ ProLinx Gateway
Protocol Manual (Firmware v2.xx)
ProSoft Technology, Inc. Page 133 of 157
March 19, 2010
5.7.5 Basic Application Functions
Station initialization
(Station-specific parameter, mark "X" if function is used)
⌧ Remote initialization
Cyclic data transmission
(Station-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
⌧ Cyclic data transmission
Read procedure
(Station-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
⌧ Read procedure
Spontaneous transmission
(Station-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
⌧ Spontaneous transmission
Double transmission of information objects with cause of transmission
spontaneous
(Station-specific parameter, mark each information type "X" where both a Type
ID without time and corresponding Type ID with time are issued in response to a
single spontaneous change of a monitored object)
The following type identifications may be transmitted in succession caused by a
single status change of an information object. The particular Information Object
Addresses for which double transmission is enabled are defined in a project-
specific list.
Single-point information M_SP_NA_1, M_SP_TA_1, M_SP_TB_1 and
M_PS_NA_1
Double-point information M_DP_NA_1, MDP_TA_1 and M_DP_TB_1
Step position information M_ST_NA_1, M_ST_TA_1 and M_ST_TB_1
Bitstring of 32 bit M_BO_NA_1, M_BO_TA_1 and M_BO_TB_1
Measured value, normalized value M_ME_NA_1, M_ME_TA_1, M_ME_ND_1
and M_ME_TD_1
- 104S v2 1
- All ProLinx 2
- Products 2
- Your Feedback Please 3
- ProSoft Technology 3
- Product Documentation 3
- Contents 5
- 1 Start Here 9
- 1.2.1 Using the Online Help 10
- 2 Configure the Gateway 13
- 2.1.1 [SNTP CLIENT] 14
- 2.1.2 [IEC-870-5-104] 16
- O (0) or YES (1) 17
- ES or NO 20
- or more 21
- ONE, 1 = CP24, or 2 = CP56 23
- ES or NO 27
- 2.1.5 [M_SP_NA_1 104] 29
- 2.1.6 [M_DP_NA_1 104] 30
- 2.1.7 [M_ST_NA_1 104] 30
- 2.1.8 [M_ME_NA_1 104] 30
- 2.1.9 [M_ME_NB_1 104] 31
- 2.1.10 [M_ME_NC_1 104] 31
- 2.1.11 [M_IT_NA_1 104] 32
- 2.1.12 [C_SC_NA_1 104] 32
- 2.1.13 [C_DC_NA_1 104] 33
- 2.1.14 [C_RC_NA_1 104] 33
- 2.1.15 [C_SE_NA_1 104] 34
- 2.1.16 [C_SE_NB_1 104] 34
- 2.1.17 [C_SE_NC_1 104] 35
- 2.1.18 Group Codes 36
- 2.2 CommonNet Data Map 38
- 2.2.1 From Address 39
- 2.2.2 To Address 39
- 2.2.3 Register Count 39
- 2.2.4 Swap Code 39
- 2.2.5 Delay Preset 40
- OWNLOAD dialog box opens 41
- OWNLOAD button 41
- Implementation 43
- 3.1 Module Address 44
- 3.1.1 IP Address 44
- 3.1.2 Common ASDU Address 46
- 3.3 Using Monitor Points 49
- 3.3.1 Monitor Data Transfer 50
- Example - Mode A 54
- D 03/26/2004 00:00:00 55
- H 03/25/2004 19:00:00 55
- M 03/25/2004 18:08:00 55
- Example (C_SC_NA) 63
- 3.4.1 Control Data Transfer 64
- 3.5 Data Communication 70
- 3.5.1 Group Communication 70
- 3.5.2 STARTDT & STOPDT 72
- 3.5.3 TESTFR Requests 73
- 3.6 Events 75
- 3.6.1 Deadbands 76
- Example: 78
- 3.6.3 Time Information 83
- CHECK DELAY TIME 84
- 3.6.5 Event Priority 87
- 3.6.6 SNTP Support 88
- 3.7 Sequence Flag 89
- 4.1.1 Required Hardware 91
- IAGNOSTICS 92
- IAGNOSTICS dialog box 92
- to open the Main Menu 93
- 4.1.3 Navigation 94
- 4.1.4 Database View Menu 97
- to open the IEC-870-5-104 100
- 4.1.6 Network Menu 102
- to return to the Main Menu 103
- 4.2 LED Indicators 104
- 5 Reference 105
- 5.2.1 Introduction 109
- 5.2.2 Configuration 109
- Word Offset Description 110
- 5.2.3 Command Block List 111
- 5.3 SNTP Support 123
- 5.3.1 SNTP Status Data 123
- 5.5 Command Qualifiers 126
- 5.6 Parameter Qualifiers 127
- 5.7.1 System or device 128
- 5.7.2 Application Layer 128
- In This Chapter 138
- Monitor Database 143
- Address 143
- Require Select 143
- 5.8.4 C_RC_NA_1 Form 145
- 6.2.1 All Product Returns: 148
- 6.3 LIMITED WARRANTY 150
- 6.3.8 No Other Warranties 153
- 6.3.9 Allocation of Risks 153
Verwandte Produkte und Handbücher für Relais Prosoft-technology 5201-DFNT-104S
(56 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.134 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern