Prosoft-technology 5201-MNET-101S Bedienungsanleitung PDF herunterladen (Seite 45)

IEC-101 Slave ♦ ProLinx Communication Gateway 101S Protocol Configuration

IEC 60870-5-101 v3 Slave (Firmware version 3.xx) Protocol Manual

ProSoft Technology, Inc. Page 45 of 159

August 6, 2010

2.9 [M_ME_NC_1]

This section defines the monitored short-float point database. This information is

sourced from the database and is transferred to the remote Master unit.

To determine the IOA (Information Object Address) for each object, add the

OINT # in the following section to the value of the M_ME_NC Parameter Offset

parameter set in the previous section.

This section takes the following parameters:

 P

OINT #

 DB

ADDRESS

 G

ROUPS (page 50)

 D

EFAULT DEADBAND

 IV

DB BIT

Each point consumes four 8-bit bytes (two 16-bit words). The DB

ADDRESS value

corresponds to the double-word offset address in the database.

The DB

ADDRESS should be located in a database area that is being constantly

moved from the gateway to the Master.

For additional information on how to set these parameters, see the Reference

chapter of this manual.

2.10 [M_IT_NA_1]

This section defines the monitored integrated totals (counter) database. This

information is sourced from the database and is transferred to the remote Master

unit. This section takes the following parameters:

 P