Prosoft-technology AN-X-AMX Bedienungsanleitung PDF herunterladen (Seite 12)

Page 8 AN-X-AMXCAPT January 2008

If the AN-X is already online, you can obtain its MAC address using the Utilities/Locate

All AN-X Modules command.

3. Enter the IP address you intend the AN-X to use.

Step 2

In step 2, you choose a method of restarting AN-X to put it in boot mode.

The preferred method is to cycle power on the AN-X. Select the first option on the

screen and click the Next >> button.

The second method, useful if the AN-X in not easily accessible, is to send it a command

over Ethernet. The AN-X must be powered on and completely running for this method to

work. For example, if this is the first time you are configuring a new AN-X, allow

sufficient time for it to acquire an IP address from a DHCP server or to time out and use

its default IP address (about 3 minutes). Select the second option on the screen and click

the Next >> button.

Step 3:

Wait for AN-X to enter boot mode. While AnxInit is waiting, the Next>> button will be

disabled. When AN-X is in boot mode, the Next>> button will be enabled.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 49 50

Keine Kommentare

Prosoft-technology AN-X-AMX Bedienungsanleitung Seite 12