Prosoft-technology AN-X-AMX Bedienungsanleitung PDF herunterladen (Seite 25)

AN-X-AMXRIO Page

Input and Output Data

The tag file contains the location of the scheduled input and output data for all I/O

modules and registers. When you import the tag file into RSLogix 5000, you can use the

tags to refer to I/O data.

Refer to page 26 for detailed information on the tag file format.

Status Input Data

The status input data consists of the following diagnostic data.

Offset Description

0 Drop status, 1 = good, 0 = bad or not present

Bit 1 = drop 1, bit 7 = drop 7, etc

1 Drop 1 extended status

0 = OK, 1 = No response, 2 = Configuration mismatch,

3=Length error, 4 = mask error

2 Drop 2 extended status

3 Drop 3 extended status

4 Drop 4 extended status

5 Drop 5 extended status

6 Drop 6 extended status

7 Drop 7 extended status

8 Transmit count

9 Receive count

10 Receive protocol errors

11 Receive noise

12 Receive timeout

13 Receive CRC error

14 Receive overrun

15 Receive abort

16 ControlLogix output average update time for previous 100

updates

17 ControlLogix output minimum update time for previous 100

updates

18 ControlLogix output maximum update time for previous 100

updates

19 ControlLogix output maximum update time since connection

opened

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 54 55

Keine Kommentare

Prosoft-technology AN-X-AMX Bedienungsanleitung Seite 25