Prosoft-technology AN-X-AMX Bedienungsanleitung PDF herunterladen (Seite 47)

AN-X-DCSNet2 Page

1. Select the Ethernet adapter that’s connected to the AN-X. In most

cases there will be just one Ethernet adapter in the computer. The AN-X

must be on the same subnet as the computer.

2. Enter the MAC address of the AN-X you are updating. This is printed

on the AN-X label. It consists of six pairs of hexadecimal digits,

separated by hyphens. In the example above, it’s 00-0c-1a-00-00-0a.

If the AN-X is already online, you can obtain its MAC address using the

Utilities/Locate All AN-X Modules command.

3. Enter the IP address of the AN-X you want to update

Step 2

In step 2, you choose a method of restarting AN-X to put it in config

mode.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 67 68

Keine Kommentare

Prosoft-technology AN-X-AMX Bedienungsanleitung Seite 47