Prosoft-technology AN-X-AMX Bedienungsanleitung PDF herunterladen (Seite 7)

AN-X-DCSNet2 Page

Hardware Features

The module has:

• LEDs to indicate the status of the connection to the Ethernet, its

own internal state, and the connection to the DCS network

• an Ethernet connector

• a 9-pin D-shell connector to connect to the DCS network

• a power connector

A watchdog timer is implemented in the module’s hardware. If the

firmware does not kick the watchdog within the timeout period the

watchdog times out and places the module into a safe fatal failure state.

A jabber inhibit timer is implemented in the module’s hardware. If the

network transmitter is on longer than 150% of the longest network

frame time, the transmitter is forced off and the module is placed into a

safe fatal failure state.

Package Contents

• AN-X-DCSNet module

• CD containing software and documentation

Other Requirements

To use the AN-X-DCSNet with the AutoMax Programming Executive

requires:

• version 3.9A or 4.3A or above of the programming executive

• version 3.1.0.4 or above of the Virtual Device Driver

1 2 3 4 5 6 7 8 9 10 11 12 ... 67 68

Keine Kommentare

Prosoft-technology AN-X-AMX Bedienungsanleitung Seite 7