
MVI46-DFNT ♦ SLC Platform Reference
EtherNet/IP Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 143 of 177
October 12, 2010
An example rung used to execute a write command is shown in the following
diagram:
The MESSAGE CONFIGURATION dialog box must be completed to define the data
set to be transferred from the processor to the module. An example of the dialog
box follows:
Complete the dialog box for the data area to be transferred. For PLC5 and SLC
messages, the D
ESTINATION ELEMENT should be an element in a data file (such
as, N10:0). For the PLC2 Unprotected Write message, the DESTINATION ELEMENT
is the address in the module’s internal database and cannot be set to a value
less than ten. This is not a limitation of the module but of the RSLogix software.
For a PLC2 unprotected write or read function, the database address should be
entered in octal format. Additionally, the COMMUNICATION information must also
be configured. The following is an example of the dialog box.
Kommentare zu diesen Handbüchern