Prosoft-technology MVI46-DFCM Bedienungsanleitung PDF herunterladen (Seite 22)

MVI46-DFCM ♦ SLC Platform Installing and Configuring the Module

DF1 Communication Module

Page 22 of 103 ProSoft Technology, Inc.

October 20, 2008

0 to 4999 N7:0 N31:199 User Data 5000

5000 to 5009 N32:0 N32:9 Backplane Configuration 10

5010 to 5039 N32:10 N32:39 Port 1 Setup 30

5040 to 5069 N32:40 N32:69 Port 2 Setup 30

5070 to 5199 N32:70 N32:199 Reserved 130

5200 to 6399 N33:0 N38:199 Port 1 Commands 1200

6400 to 7599 N39:0 N44:199 Port 2 Commands 1200

7600 to 7700 N45:0 N45:199 Misc. Status Data 200

7800 to 7999 N46:0 N46:199 Command Control 200

8000 to 9999 N47:0 N56:199 Reserved 2000

The user data areas hold data collected from other nodes on the network (master

read commands) or data received from the processor. Additionally, this data area

is used as a data source for the processor (read blocks) or other nodes on the

network (write commands).

2.2.1 Backplane Configuration

Database in SLC Database in MVI46-DFCM

File M0 Offset File Register Content Description

N10:0 1 N32:0 5000 Write Start Reg Not used in this version of the software

N10:1 2 N32:1 5001 Write Reg

Count

Not used in this version of the software

N10:2 3 N32:2 5002 Read Start Reg Not used in this version of the software

N10:3 4 N32:3 5003 Read Reg

Count

Not used in this version of the software

N10:4 5 N32:4 5004 Backplane Fail This parameter specifies the number of

successive transfer errors that must

occur before the communication ports

are shut down. If the parameter is set to

0, the communication ports will continue

to operate under all conditions. If the

value is set larger than 0 (1 to 65535),

communications will cease if the

specified number of failures occur.

N10:5 6 N32:5 5005 Error Status

Pointer

This parameter specifies the register

location in the module's database where

module status data will be stored. If a

value less than 0 is entered, the data will

not be stored in the database. If the

value specified is in the range of 0 to

4940, the data will be placed in the user

data area.

N/A N/A N32:6 5006 Spare Not used

N/A N/A N32:7 5007 Spare Not used

N/A N/A N32:8 5008 Spare Not used

N/A N/A N32:9 5009 Spare Not used

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 102 103

Kommentare zu diesen Handbüchern

Keine Kommentare

Prosoft-technology MVI46-DFCM Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Relais Prosoft-technology MVI46-DFCM