Prosoft-technology MVI46-DFCM Bedienungsanleitung Seite 82
- Seite / 103
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
MVI46-DFCM ♦ SLC Platform Reference
DF1 Communication Module
Page 82 of 103 ProSoft Technology, Inc.
October 20, 2008
Column Parameter Description Parameter
9 to 11 Not Used These fields are not used by the command. Values
entered in these columns will be ignored.
P2 to P4
This function reads one or more words of data from the PLC memory. This
function should work on the following devices: 1774-PLC, PLC-2, PLC-3, PLC-5,
SLC 500, SLC 5/03, SLC 5/04 and MicroLogix 1000.
Function Code #3 - Protected Bit Write (Basic Command Set)
Column Parameter Description Parameter
1 Enable/Type Word 0=Disabled, 1=Continuous and 2=Conditional.
Virtual Database Address This parameter defines the database address for the
data to be associated with the command. The address
defined represents a register address and not a bit
address. This function will update one or more words of
data as defined by the count parameter.
3 Poll Interval Minimum time in tenths of a second to wait before
polling with this command.
4 Count Number of data word values to be considered by the
function.
5 Swap Type Code Swap type code for command: Always zero (0).
6 Node Address Address of unit to reach on the data highway.
7 Function Code = 3 Protected Bit Write Function
8 Word Address Word address where to start the write operation. P1
9 to 11 Not Used These fields are not used by the command. Values
entered in these columns will be ignored.
P2 to P4
This function sets or resets individual bits within a limited area of the PLC data
table. This function should work on the following devices: 1774-PLC, PLC-2,
PLC-3, PLC-5 and PLC-5/250.
Function Code #4 - Unprotected Bit Write (Basic Command Set)
Column Parameter Description Parameter
1 Enable/Type Word 0=Disabled, 1=Continuous and 2=Conditional.
2 Virtual Database Address This parameter defines the database address for the
data to be associated with the command. The address
defined represents a register address and not a bit
address. This function will update one or more words of
data as defined by the count parameter.
3 Poll Interval Minimum time in tenths of a second to wait before
polling with this command.
4 Count Number of data word values to be considered by the
function.
5 Swap Type Code Swap type code for command: Always zero (0).
6 Node Address Address of unit to reach on the data highway.
7 Function Code = 4 Unprotected Bit Write Function
8 Word Address Word address where to start the write operation. P1
9 to 11 Not Used These fields are not used by the command. Values
entered in these columns will be ignored.
P2 to P4
This function sets or resets individual bits within a limited area of the PLC data
table. This function should work on the following devices: 1774-PLC, PLC-2,
PLC-3 and PLC-5.
- MVI46-DFCM 1
- Please Read This Notice 2
- Contents 5
- 1 Start Here 9
- 1.2 Package Contents 10
- 1.3 Setting Jumpers 11
- 1.6.1 Configuring RSLinx 15
- In This Chapter 19
- 2.1 Module Configuration 21
- 2.2 MVI46-DFCM Configuration 21
- 2.2.2 Port 1 Setup 23
- 2.2.3 Port 2 Setup 26
- 2.2.4 Port 1 Commands 30
- 2.2.5 Port 2 Commands 30
- 2.2.6 Miscellaneous Status 30
- 2.2.7 Command Control 32
- 3 Ladder Logic 33
- 4.1.2 Required Hardware 36
- 4.1.3 Required Software 36
- 4.1.5 Main Menu 38
- Code Description 40
- 0 Transfer successful 40
- 4.1.6 Data Analyzer 41
- 4.1.7 Data Analyzer Tips 43
- 4.1.8 Database View Menu 46
- 4.2 LED Status Indicators 50
- 4.2.2 Troubleshooting 52
- 5 Reference 53
- 5.2 Functional Overview 55
- 5.2.1 General Concepts 55
- 5.2.3 Module Data 69
- 5.3 Cable Connections 71
- 5.3.2 RS-232 74
- 5.3.3 RS-422 76
- 5.3.4 RS-485 76
- 9998 Warm boot the module 77
- 9999 Cold boot the module 77
- 5.5 Error Codes 78
- 5.5.1 Local STS Error Codes 78
- 5.6.1 Introduction 80
- 5.6.2 Command Function Codes 81
- 5.7 DF1 Command List Form 92
- 6.2.1 All Product Returns: 94
- 6.3 LIMITED WARRANTY 96
- 6.3.8 No Other Warranties 99
- 6.3.9 Allocation of Risks 99
Verwandte Produkte und Handbücher für Relais Prosoft-technology MVI46-DFCM
(177 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.055 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern