Prosoft-technology MVI46-DFCM Bedienungsanleitung PDF herunterladen (Seite 26)

MVI46-DFCM ♦ SLC Platform Installing and Configuring the Module

DF1 Communication Module

Page 26 of 103 ProSoft Technology, Inc.

October 20, 2008

Database in SLC Database in MVI46-DFCM

File M0 Offset File Register Content Description

N10:28 29 N32:32 5032 First File

This parameter is used when a

request for a file is received on

the communication port. This field

is required when responding to

PLC5 and SLC DF1 commands.

Use this parameter to define the

virtual file(s) to be simulated on

the module. This value is fixed at

7 for N7.

N10:29 30 N32:33 5033 File Size

This parameter specifies the size

of each file to be simulated on the

module. All files simulated are

defined to have the same

assigned size. This value is fixed

at 200.

N10:30 31 N32:34 5034 File Offset

This parameter sets the database

element in the first file simulated

in the module. All offsets in the

first file and subsequent files will

be computed using the address

specified. This value is fixed at 0.

Therefore, the module assumes

N7:0 starts at the database offset

of 0 and each file is 200 words in

size.

N/A N/A N32:35 5035 Spare Not used

N/A N/A N32:36 5036 Spare Not used

N/A N/A N32:37 5037 Spare Not used

N/A N/A N32:38 5038 Spare Not used

N/A N/A N32:39 5039 Spare Not used

2.2.3 Port 2 Setup

Database in SLC Database in MVI46-DFCM

File M0 Offset File Register Content Description

N10:31 32 N32:40 5040 Enable

This parameter defines if this port

will be utilized. If the parameter is

set to 0, the port is disabled. A

value of 1 will enable the port.

N10:32 33 N32:41 5041 Type

This parameter defines if the port

will emulate a master or slave

device. Enter 0 to emulate a

master device and 1 to emulate a

slave device.

N10:33 34 N32:42 5042

Local Station

This parameter specifies the local

station ID for all DF1 messages

sent from this master port. A

value of 255 is not permitted as

this is the broadcast address.

Valid value in the range of 0 to

254.

N10:34 35 N32:43 5043 Protocol 0=full duplex, 1=half-duplex

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 102 103

Kommentare zu diesen Handbüchern

Keine Kommentare

Prosoft-technology MVI46-DFCM Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Relais Prosoft-technology MVI46-DFCM