Prosoft-technology PLX81-EIP-61850 Bedienungsanleitung PDF herunterladen (Seite 38)

Configuring the PLX8x-EIP-61850 Gateway PLX8x-EIP-61850 ♦ Communication Gateway

User Manual Server to

IEC 61850 Client

Page 38 of 167 ProSoft Technology, Inc.

July 2, 2015

2.13 Downloading the Configuration File to the Gateway

After you have created the IEC 61850 project in the Configuration Manager

software, you are ready to download it to the gateway.

Note: If you want to validate the configuration before downloading, refer to

Validating the Configuration on page 37.

1 Right-click the Project bubble and choose DOWNLOAD FROM PC TO DEVICE.

This displays the Transfer File dialog box.

2 Click TEST CONNECTION. If the gateway’s IP address does not match what

was entered in EIP-61850 Configuration Manager, then the software displays

an error message:

Error: Connecting to Module. Please check your IP Address.

If the gateway's IP address matches the address in the Configuration

Manager, and the software displays the following message:

Successfully Connected.

3 Click DOWNLOAD to download the project to the gateway.

NOTE: If you see the Error: Download Configuration message, make sure that the MODE 3

jumper is correctly installed on the module, since a configuration download is only allowed when

the jumper is installed. Refer to Setting Jumpers on page 11.

If you need to change MODE 3 jumper, note that the jumper setting is only read by the module

when it powers up; therefore you must reboot the gateway before it can recognize the change in

the jumper setting.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 166 167

Keine Kommentare

Prosoft-technology PLX81-EIP-61850 Bedienungsanleitung Seite 38