Prosoft-technology PLX81-EIP-61850 Bedienungsanleitung Seite 83
- Seite / 167
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
PLX8x-EIP-61850 ♦ Communication Gateway Reference
Server to
IEC 61850 Client User Manual
ProSoft Technology, Inc. Page 83 of 167
July 2, 2015
5.2 Hardware Specifications PLX8x-EIP-61850
Specification
Description
Power Supply
24 VDC nominal
10 to 32 VDC power input allowed
Positive, Negative, GND Terminals
2.5 mm screwdriver blade
Current Load
200 mA maximum @ 24 VDC
150 mA maximum @ 32 VDC
450 mA maximum @ 10 VDC
Operating Temperature
32°F to 140°F (0°C to 60°C)
Storage Temperature
-40°F to 185°F (-40°C to 85°C)
Relative Humidity
5% to 95% RH, with no condensation
Dimensions
Standard: Height x Width x Depth
4.72 inches x 1.90 inches x 4.18 inches
Ethernet Port (E1)
10/100 Base-T half duplex RJ45 Connector
Link and Activity LED indicators
Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60 s, applied as
specified in section 5.3.2 of IEC 60950: 1991
Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP]
frames-per-second and less than or equal to 5 minutes duration
LED Indicators
ERR, CFG, FLT, PWR
Shock and Vibration
Shock and Vibration tested to EN 60068 Standard
Shipped with Each Unit
One - Ethernet straight-through cable
One - J180 screw terminal plug
One - ProSoft Solutions DVD
One - HRD250 screwdriver
One - 1GB Industrial SD Card
5.3 LEDs
LED
State
Description
Pwr
Off
Power is not connected to the power terminals or source is
insufficient to properly power the gateway (800mA at 24 VDC
minimum required)
Pwr
Green Solid
Power is connected to the power terminals. Verify that the other
LEDs for operational and functional status come on briefly after
power-up (check for burned-out LEDs).
Flt
Off
Normal operation
Flt
Red Solid
A critical error has occurred. Program executable has failed or has
been user-terminated and is no longer running. Press Reset p/b or
cycle power to clear error.
Cfg
Off
Normal operation
Cfg
Amber Solid
The unit is in configuration mode. The configuration file is currently
being downloaded or, after power-up, is being read, the unit is
implementing the configuration values, and initializing the hardware.
This occurs during power cycle, or after pressing the reset button. It
also occurs after a cold/warm boot command is received.
Err
Off
Normal operation
Err
Flashing
An error condition has been detected and is occurring on one of the
application ports. Check configuration and troubleshoot for
communication errors.
Err
Solid Amber
This error flag is cleared at the start of each command attempt
- PLX8x-EIP-61850 1
- Your Feedback Please 2
- How to Contact Us 2
- Content Disclaimer 2
- Important Safety Information 3
- Contents 5
- 1 Start Here 9
- 1.2 System Requirements 10
- 1.3 Package Contents 10
- 1.4 Setting Jumpers 11
- 1.4.1 PLX81-EIP-61850 11
- 1.4.2 PLX82-EIP-61850 12
- SSIGN TEMPORARY IP 16
- ROPERTIES. You can 19
- 2.8 Importing IEDs Files 21
- To change the MMS Scan Delay 24
- To locate the IED file 25
- 2.10.1 Mapping MMS Messages 26
- 2.10.2 Mapping Reports 29
- ONFIGURE 31
- OWNLOAD FROM PC TO DEVICE 37
- ILE > NEW 39
- PLOAD FROM DEVICE TO 39
- XPORT AOI FILES 40
- PDATE IED 41
- ELETE. This removed the tag 42
- APPING > SAVE to 42
- EW MODULE 44
- 3.3 Add the Gateway 46
- OMM FORMAT must be SINT 48
- ROPERTIES 48
- IAGNOSTIC 50
- ROPERTIES) 50
- PERATION is set to 51
- REATE, and then click OK 51
- DD-ON 52
- EW TAG 52
- EW TAG… 54
- REATE button to build the 55
- MPORT CONTENT tree 56
- EFERENCES 56
- 4.1 Known Anomalies 57
- 4.3 Driver Status Data 58
- 4.3.1 Status values 60
- 4.4 Rebooting the Gateway 60
- ALUE field. Data 61
- To Print the Data 62
- To Start/Stop Data Update 62
- 4.6.2 MCP Diagnostics 66
- 4.6.4 SNTP/NTP 71
- 4.8 Event Logger 73
- 4.8.1 61850C Events 75
- 4.8.2 EIPS Events 75
- 4.8.3 MCP Events 76
- 4.8.4 MCP Interface Events 76
- 4.8.5 SNTP/NTP Events 76
- 4.9 Gateway Troubleshooting 77
- 5 Reference 79
- 5.3 LEDs 83
- 5.4 Gateway 84
- 5.4.2 Tag Database 85
- 5.4.3 SNTP/NTP 86
- 5.5.2 DATA-SET 89
- 5.5.3 Report Control Block 90
- 5.5.4 GOOSE Control Block 94
- 5.5.5 Control 96
- 5.5.6 MMS 101
- 5.5.7 EtherNet/IP Adapter 105
- 5.5.8 IEC 61850 Client 106
- 5.6.2 IEC 61850 Benefits 109
- Description Language (SCL) 110
- 5.6.7 GSE (Clause 15) 112
- 5.6.8 Control (Clause 17) 112
- IMEACTIVATEDOPERATE 116
- OMMAND-TERMINATION 116
- 5.7 Usage Examples 120
- 5.7.4 Monitoring 124
- In This Chapter 127
- 6.2 Warranty Information 128
- List of Abbreviations 129
- Glossary of Terms 145
Verwandte Produkte und Handbücher für Relais Prosoft-technology PLX81-EIP-61850
(36 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern